Print Page | Close Window

Unertl Ultra Varminter

Printed From: OpticsTalk by SWFA, Inc.
Category: Scopes
Forum Name: Varmint Scopes
Forum Description: Critter gittin' scopes
URL: http://www.opticstalk.com/forum_posts.asp?TID=45260
Printed Date: July/13/2020 at 03:26
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Unertl Ultra Varminter
Posted By: kline27
Subject: Unertl Ultra Varminter
Date Posted: November/17/2018 at 19:32
 I recently obtained a 15X Unertl Ultra Varminter with a dehorn rear mount.  Can anyone tell me how to adjust it?  I tried turning he knurled knobs but they don't seem to want to move.  Are the hex shape protrusions caps that are removed to provide access to adjustments?  Help!  I'm desperate.



Replies:
Posted By: Springer2
Date Posted: December/04/2018 at 15:53
The knurled knobs are the adjusters. The top for elevation and the one on the right for windage. If they don't move, first look on the lower left of the rear mount. You should see a round part coming out of the rear mount. That houses the spring. Give the scope tube a light push against the spring and it should move. If the scope moves, the spring is okay and the adjusters are just tight. Put some light oil on them and they should turn even if tight. Keep working the knobs until they loosen up. Hope this helps.


Posted By: Flasks
Date Posted: December/14/2019 at 00:50
I have the enertl 15x commander. At first I thought my micrometer adjustments weren't working as it had been in storage for many years according to the man I bought it from. I learned through trial and error that the threads are so fine that movement of the scope itself is hard to detect but it was moving. Each of those knobs by the way accept a very small allen wrench to loosen the knobs to "free" spin...used for setting up the scope, sighting in and  then returning the knobs,not to reposition the scope. Zero your rifle for whatever range you want, loosen the knobs and set the scale to"O"and retighten the knobs. Now when you adjust the scope for a difference scenerio you can always retun the scope to zero which was you sighting in position. Gently re-tighten the allen screws and you're set to go. Each click is 1/4 m.o.a."Springer2" forgot to mention that the front mount is the pivot mount. In setting the optics use the ocular optic for sharpening the cross hairs only....once you've achieved that clean crisp picture then you can use the objective lens to bring the target into sharp focus and you're good to go. I'm curious about the model you have...what is the tube diameter, style of crosshairs, eye relief and does the scope have screw-in lens protective caps? Are the bases standard or Bosa style?  Don't forget to put a drop or two of light oil on the top rail the scope slides on during recoil. If you have a spring installed the scope will reposition itself automatically....if not gently pull the scope reward until it hits the stop ring. You have a super scope, equal to some of the so called high rollers and it is quite valuable in its own right as a classic.

-------------
after 83 years I should have learned something!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net